[17]
4.11.
Display Angle on the 4th Axis
To display angle on 4th axis by “system setting“menu the encoder pulse number must be entered as W resolution.
And again by “system setting “menu, rotary type must be selected. You can also see the this setting on system
setting as detailed.
The angle can be set as Degree or Degree.minute.second. To make passing please press “Sw” button and “Tan/F3”
button accordingly.
Example:
To Change Degree Angle as Degree.minute.second;
4.12.
Sleep Mode:
When the screen is on sleepy mode all the buttons are turned off except “HOLD” button. By this way 3th Person
interfere will be prevented. Although the buttons are turned off, the signals will be process. If you change the table
place it senses this changing and if in the normal mode it use the last position.
In the brake times and after works the device can be sleepy mode until beginning to work again.
You can pass “Sleepy Mode” by “HOLD” button and it is possible to exit by the same “HOLD” button.
Example:
To pass to “Sleepy” mode and to exit;