11
OPERATIONS AND USE
RIM REPAIRING POSITIONS
OPERATIONS AND USE
***
When repairing iron rims use also the manuel handle plus to the pres.
***
Before the pressing operation some rims need to be heated (especially aliminum rims). This procedure is for:
1.
Avoiding cracks and faults on the rim
2.
Piston’s safety
3.
Your personel safety
***
If the rim is too defected first mend it with the lever and then repair it with the pres..
LATHE OPERATION
*** TIGHT THE FIXING HANDLE DURING
LATHE OPERATION.
***UNTIGHT THE NUTS DURING LATHE
OPERATION
Lathe operation: this procedure is for cleaning the burrs and the overplus parts of the welding operation.
1) With the help of double impact cylinder, it can press both as pulling and as pushing.
2) Moving thrusting part to left, right, up and down, can do the best repairing process.
3) Damages on rim from in to out, out to in, front and back can be pressed as shown in the figure.
