background image

ATEG Automation GmbH

 

|

 Intzestraße 50 

|

 42859 Remscheid 

|

 Germany 

|

 Tel.: +49 (0)2191 / 591457-0 

|

 [email protected] 

|

 

www.ateg.de

Datenblatt

Zeitrelais H3DT

H3DT

H3DT-A

15

Nomenclature

Dimensions

(Unit: mm)

Timers

Track Mounting Products (Sold Separately)

Refer to page 29 for details. 

Options (Order Separately)

Front Cover

Refer to page 29 for details. 

Time range switch 

*

If the switch is left between settings, proper operation may not be possible. 

 Make sure that the switch is set properly.

Note: The default settings are for 0.1 s. 

Front View

Output indicator (orange) 
(Lit while Timer gives output.)

Main dial 
(for setting the time)

Operation/power indicator (green)  
(Flashes while Timer is operating. 
Lit when Timer is stopped.)

H3DT-A2

Time range switch 

*

If the switch is left between settings, proper operation may not be possible. 

 Make sure that the switch is set properly.

Note: The default settings are for 0.1 s. 

Front View

Output indicator (orange) 
(Lit while Timer gives output.)

Operation/power indicator (green)  
(Flashes while Timer is operating. 
Lit when Timer is stopped.)

Main dial 
(for setting the time)

H3DT-A1

17.5

17.5

90

90

8

6

5

H

3

DT-A2

H

3

DT-A1

100

H3DT-A

Erstellt am 04.09.2021 um 04:38 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!

Seite 16 von 37

Summary of Contents for H3DT






































Reviews: