15
Operating and Safety Instructions
7. DUST COLLECTION CONNECTORS
Inner Diameter: 80 mm
Outer Diameter: 100 mm
8. OPERATION
The automatic upcut saw model CRATER-600 A cuts non-ferrous aluminum, PVC profiles
and PVC materials. The operator adjusts (manually via knob) the cutting speed of the saw
blade according to the material type to be cut. Inner and outer sharp edges of the
carbide tipped circular saw blade ensures high quality clean cutting results.
•
Use the rising speed adjustment knob on the control panel to adjust the saw blade rising
speed.
•
Start the machine by pressing the Motor Start button.
•
Press the Saw Blade Up button.
•
Set the rising speed of the saw blade (at idle operation). Turning the knob clockwise
increases the rising speed, turnbing to counter clockwise decreases the rising speed.
8.1.1.
Start the machine only after proper clamping of the work piece to be cut.
CAUTION !
