SD-AT-DW Page 1 of 4
Installation Guide
SD-AT-DW
Wall Full Motion Mount
COMPONENT CHECKLIST
REQUIRED TOOLS
A
Articulated
Arm Assembly
(x1)
B
16mm Cable
Wrap
(x1)
C
Direct Wall Mount
Bracket Assembly
(x1)
E
Cable Wrap
Applicator
(x1)
F
Cable Clip
(x3)
G
M6 Washer
(x4)
H
Nylon
Archor Plugs
(x4)
I
M6x40
Coach Screw
(x4)
J
Extension
Clip
(x4)
K
2.5/5mm
Allen Key
(x1 each)
L
Top Cap
Tool
(x1)
M
Mounting Screw
M4x16mm
(x4)
N
Mounting Screw
M4x12mm
(x4)
O
Mounting Screw
M4x10mm
(x4)
• Phillips Head Screwdriver
WEIGHT RANGE
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! This mount supports a maximum weight of 3kg to 9kg (6.6lbs to 19.8lbs).
! This product supports VESA mounting hole configurations: 75x75mm and 100x100mm.
! The manufacturer accepts no responsibility for incorrect installation.
! Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can
exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact
Atdec if you would like further information.
3 - 9kg
6.6 - 19.8lbs
