SD-AT-DW Page 2 of 4
Display
4x10mm
Screws
75mm
75mm
1.
Direct Wall Mount
3.
Attaching the Display
2.
Mount Arm to Wall Bracket
1.1 Refer to Ergonomic
guidelines overleaf to
determine best position
to mount wall bracket.
OPTION A
75x75mm VESA mount
75mm x 75mm mounting hole pattern
OPTION B
100x100mm VESA mount
100mm x 100mm mounting hole pattern
2.1 Attach the Arm to the
Direct Wall Mount Bracket.
Tighten the Top Cap with
the supplied Top Cap Tool.
1.2
For Timber Stud Mounting
- Use the Direct
Wall Mount Bracket to mark out the location
of the required four holes. (see Step 1.1) Drill
4mm holes deep enough to receive the M6
Coach Screws, insert the screws and secure the
bracket to the wall.
1.3
For Masonry Mounting
- Use the Direct
Wall Mount Bracket to mark the location
of the required four holes. (see Step 1.1)
Using an 8mm masonry drill bit, drill four
holes 41mm deep. Insert the Nylon Anchors
and then secure the Bracket to the wall using
the M6 Coach Screws.
Front View of the Direct
Wall Mount Bracket
Note
Ensure Bracket
is mounted Vertically.
1
2
3
4
Timber Stud
Wall
Direct Wall
Mount Bracket
4mm Hole
M6 Washer
M6 Coach Screw
Tighten
using the
Top Cap Tool
Insert
Threaded
Rod and
Top Cap
Direct Wall
Mount Bracket
Plastic Bottom Cap
Arm with
inner tube
1
3
2
4
Brick or Concrete Wall
S8 Nylon Anchor
M6 Coach Screw
8mm Hole
Direct Wall
Mount Bracket
M6 Washer
2.2 Tighten
TIGHTEN
Extension Clip
4x12mm or
4x16mm Screws
100mm
100mm
Display
Note
Ensure that the flat
side of each extension
clip sits against the back
of the display.
