AWM-2-LTH75-H Page 4 of 6
AWM-LC
Channel Clamp
COMPONENT CHECKLIST
A
Channel
Clamp
(x1)
1.
Fix Clamp to Post
1.1
Ensure knob is undone.
1.2
Slide Channel Clamp into channel.
Push knob to
aid insertion
1.3
Hold clamp in desired position on post
and turn knob to lock in place.
1. Ensure Knob is undone
Tip: push knob
to aid insertion
2. Slide post clamp into channel3. Hold clamp in desired position on post and turn
knob to lock in place
2.1
Remove plastic sleeve.
2.2
Remove rotation ring
2.3
Place rotation ring in the desired position and
replace
plastic sleeve.
NOTE:
Place the rotation ring
depending on what post channel
the arm will be attached to. The tag
should always face towards the user.
1. Remove plastic sleeve
2. Remove rotation ring
1. Press
2. Lift
3. Place the rotation ring
in the desired postion
180°
360°
OR
Default
Position
Flipped
Position
Tag
2.
(Optional) Set arm rotation to 180°
NOTE:
default arm rotation is set to rotate 360�
WEIGHT RANGE
0 - 14
kg
(0 - 31
lbs
)
NOTE:
Do not remove/
throw away plastic cap
on channel clamp.
