AWM-2-LTH75-H Page 2 of 6
1.
Attach post to upper clamp
Fasteners
supplied
with post
NOTE:
Post packaged separately
3.
Fit fixing to work surface
3.1
Place in desired location on worksurface
3.2
Screw in both pressure plates and
tighten evenly and firmly
Mounting
surface
5mm
allen key
2.
Attach lower clamp to upper clamp
2.2
Attach lower clamp to upper clamp in the suitable
position using the two provided screws
2.1
Measure the worksurface thickness and
choose the suitable lower clamp position
NOTE:
If there is only a small gap behind the
worksurface, perform
Step 3.1
before this step.
T M B
Top
Middle
Bottom
0 - 38mm (0.00 - 1
1/2
”)
11 - 53mm (
7/16
”
- 2
1/16
”
)
25 - 68mm (1” - 2
5/8
”)
AWM-FH
Heavy Duty F Clamp
COMPONENT CHECKLIST
D
5mm Allen key
(x1)
B
Lower Clamp
(x1)
A
Upper Clamp
(x1)
C
Screw M8 x 16mm
(x2)
