AWM-A46 Page 4 of 4
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20180521C
Note:
The cable cover shown
does not come with all posts
7.4
To reposition the cable cover, pull it
straight up and out of the post and insert
it into any of the available channels
Cable cover
Cable
Cover
Desk
Clamp
7.1
Push the cable down into the cable clip
Note:
Cable clips do not
come with all posts
7.6
Feed remaining cable into cover
7.5
Loop cable and insert into cable cover
7.2
Push cable clip into post channel
7.
Post cable management
7.3
Recommended post cable cover
position for double or triple arm set-ups
Note
Ensure enough cable
slack is given to allow for
movement of the monitor
Push
6.
Monitor arm cable management
6.1
Plug cables into the monitor and route
the cables down the arm using the cable
hooks and clips
Alternative cable
cover positions
AWMS-2-D13-C | Page 13 of 13
AWM-AD Page 4 of 4
8.
Cable management
8.1
Plug cables into the monitor and
route the cables down the arm using
the cable hooks and clips.
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20180727
See steps
8.2
to
8.4
8.2
Wedge cable into the central gap
and slide it down the arm.
8.3
The cable should slip into the arm cavity
8.4
Slide the remaining loose cable
from the central gap up the arm.
Important!
Ensure enough cable slack is
given in this area to allow for
movement of the monitor.
