AWM-LR Page 1 of 4
Installation Guide
AWM-LR
Dual Crossbar
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Do not remove/ throw away the plastic cap on arm links, channel clamp or base.
! Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can
exceed the capacity of the mount even though the monitor weight may be within the stated range.
! The manufacturer accepts no responsibility for incorrect installation.
! This product is compatible with AWM Series monitor arm products.
COMPONENT CHECKLIST
REQUIRED TOOLS
A
Crossbar
Assembly
(x1)
B
VESA Plate
(x2)
C
Handle
(x1)
D
Screw
M4x10mm
(x8)
E
Screw
M4x12mm
(x8)
F
Screw
M4x16mm
(x8)
I
Plastic
Washer
(x2)
H
Hole
Cap
(x2)
J
Screw
M6x16mm
(x2)
G
Security
screw
(x2)
K
4mm
Hex Key
(x1)
L
3mm
Hex Key
(x1)
• Phillips Head Screwdriver
2 - 7kg
(4.5 - 15lbs)
per monitor
WEIGHT RANGE
Monitor weight should be
within the weight range of all
modular elements that make
up the complete monitor
mounting solution.
