AF-MC Page 4 of 4
Note:
If Focus Micro
is to be used in a multi
user environment, use
the supplied Cable Clip
to secure the display’s
cables to the Pole.
Cable Stop
Cable Clip
Note:
Ensure enough
cable slack is given to
allow for movement.
Note:
If Focus Micro
is to be used in a multi
user environment, use
the supplied Cable Clip
to secure the display’s
cables to the Pole.
Cable Stop
Cable Clip
Note:
Ensure enough
cable slack is given to
allow for movement.
10.2
After connecting cables,
Cable Clips and Cable Stops can
be installed to further manage
cables.
Please See Over.
10.
Cable Management
11.
Insert Cable Stops
Note:
Press down firmly onto
the other edge of the Cable
Stop and hold. This allows the
rear profile to flex in place
11.1
Insert Cable Stop on one
edge of the Pole Slot
11.2
Insert allen key into top cap
on pole
Allen Key
Storage
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20180723
12.
Adjusting the Display Bracket
Portrait/ Landscape
Tilt
(Screen angle up/down)
Pan
(Screen angle left/right)
No Allen Key
necessary
No Allen Key necessary
Note:
Support Screen when
adjusting tilt.
100mm
75mm
100mm
75mm
5mm
Allen Key
Tighten
Loosen
VESA
75 x 75 / 100 x 100mm
