AF-MC Page 3 of 4
8.
Unlock/Lock Arm Rotation
(Note: Focus Micro comes assembled in the “Locked” Position.)
Pole
2mm Allen Key
Grub Screw
Micro Arm
2mm Allen Key
Grub Screw
CL
Grub Screw Hole
Slot in Pole
Unlock
If you wish your Focus Micro Arm to have 360º rotation
about the Pole you will need to unlock the arm’s rotation
Step 1:
Unlock the arm by turning the Grub Screw
anti-clockwise removing the Grub Screw completely
Note:
Store the Grub Screw in a safe place if you are to
return the arm to the Locked position
Lock
If you have unlocked your Focus Micro Arm, but wish to
fix rotation around the Pole, you will need to lock the arm
Step 1:
Ensure the hole for the Grub Screw in the Micro
Arm is lined up with the centre of the Slot in the Pole
Step 2:
Re-insert the Grub Screw
previously removed. Turn the Grub
Screw clockwise until it is tight.
Do not over-tighten
7.
Mounting Monitor
VESA monitor head
Arm Assembly
7.2
OPTIONAL SECURITY SCREW
Ensure the Monitor is supported, then loosen the Monitor head
screw with the 5mm Allen Key and tilt screen up before installing
the M4 x 16mm Security Screw into the Security Screw hole
Note:
Support Screen
when adjusting tilt.
7.1
Insert VESA monitor head into the
receptacle in the Arm Assembly
5mm Allen Key
Phillips Head
Screwdriver
Loosen
Tighten
Security Screw
Hole
M4 x 16mm
Security Screw
Monitor head
screw
9.1
Unlock ensuring both screen and arm
assembly are supported
9.2
Lift/Lower Screen to the desired
height. Move both Screen and Arm
assembly together.
9.3
Lock Handgrip firmly.
9.
Adjusting Height
