USB Gateway
Requirements
In order to install the USB Gateway you will need the following:
1.
USB Gateway
2.
USB cable
3.
RJ11 cable
4.
Telephone (regular telephone, cordless phone, DECT phone, …)
5.
Telephone service (for conf call, 3 way calling and forwarding features)
6.
Broadband internet service is recommended
7.
PC with the following minimum specifications:
o
Pentium 400MHz or equivalent
o
Windows 2000 or XP
o
Available USB port (1.0, 1.1 or 2.0)
o
Skype™ version 1.1.079 or higher (
www.skype.com
) must be installed
o
128MB RAM
o
10MB available hard disk space
o
CD-ROM drive to install VoIP Agent from the supplied CD-ROM
Note that the USB Gateway must be connected directly to the PC USB port or to an
AC Powered USB hub. It CANNOT be installed on a bus powered USB hub.
Page 5 of 48
