ATCOM AT800 Series User Manual Download Page 40

Page: 40 / 42

AT800 Series User Manual

ATCOM TECHNOLOGY CO., LIMITED

www.atcom.cn

Phone book



Phonebook

---View, add, edit, delete phonebook entries.

Add: Click "New Contact" button to add new entry. Choose Directory mode, and filled in

the blank of Name and Number filed.

Edit: Change the content in Name and Number filed.
Delete: Click "Delete" button to delete the entry.

After finishing, click submit button to take them effect.



Black List-

--View, add, edit, delete black list entires. The numbers in blacklist will not

be able to call the phone.

Add: Click "New Contact" button to add new blacklist entry. Choose Blacklist mode, and

filled in the blank of Name and Number filed.

Edit: Change the content in Name and Number filed.
Delete: Click "Delete" button to delete the entry.

After finishing, click submit button to take them effect.

Call log



Redial

---View dialed calls



Receive

d---View answered calls



Missed-

--View missed calls

Summary of Contents for AT800 Series











































Search results

Summary of Contents for AT800 Series

Reviews:

Related manuals for AT800 Series

Brands by name

Popular brands

ATCOM AT800 Series, User Manual

Search results

Summary of Contents for AT800 Series

Reviews:

Related manuals for AT800 Series

Brands by name

Popular brands