AT800 Series User Manual
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn
Product Info
To view information about the Product:
Press
menu
softkey
Scroll to
Product Info
, then press
select
Review the following information:
1. Product Name: AT800
2. Serial Number: Product Serial Number
3. Software Version:
Software version of the product
4. Hardware Version:
Hardware Version of the product
5. MAC Address:
MAC address of LAN port
6. Protocol:
SIP
Network
Set mode on LAN port and PC port.AT800x supports static IP, DHCP client and PPPoE on
LAN port. AT800 can work as bridge and router mode on PC port, and AT800D can only
supports bridge mode.
LAN port
To view and edit LAN port Network parameters:
Press
menu
softkey
Scroll to
Network
, and press
select
View the status,
1. Connect Type:
DHCP, Static
2. Current IP:
IP address
3. Hostname:
Hostname
4. Domain:
The domain name
5. Current Netmask:
The current netmask
6. Current Gateway:
The gateway address
7. Enable Web Server:
Access by web interface. Default is set to yes. If
disabled, user will not able to access webpage.
8. Non-DHCP IP Address: Static IP address
9. Non-DHCP Subnet Mask:
Static netmask address
10. Non-DHCP default route:
Static gateway address
11. Non-DHCP DNS1/DNS2:
Primary DNS and Secondary DNS working in
static IP.
12. Enable VLAN: Enable/disable VLAN
