AT-620 User Manual
ATCOM TECHNOLOGY CO., LIMITED
4.3.
Net Service
9
HTTP Port: set web browser port, the default is 80 port
,
if you want to
enhance system safety
,
you'd better change it into non-80 standard port
;
Example: The IP address is 192.168.10.88. and the port value is 6090, the
accessing address is http://192.168.10.88:6090
9
Telnet Port:Set Telnet Port, the default is 23. You can change the value into
others. Example: The IP address is 192.168.1.88. the telnet port value is
6023, the accessing address is telnet 192.168.1.88:6023
9
RTP Initial Port: Set the RTP Initial Port. It is dynamic allocation.
9
RTP Port Quantity: Set the maximum quantity of RTP Port, the default is
200.
Notice:
1
)
You need save the configuration and reboot the phone after set this page.
2
)
If you modify the port of Telnet and HTTP, you would better set the value more
than 1024 because the port value less than 1024 is system port reserved.
3
)
if you set 0 for the HTTP port, it will disable HTTP service.
4.4.
Firewall