AT-620 User Manual
ATCOM TECHNOLOGY CO., LIMITED
1) Press “MENU”
2) Press up or down navigation key, and select call history and press soft
button “OK”
3) Select “Outgoing call” through “up” or “down” key, and press soft button
“OK”
4) Press up or down navigation button and check the received calls, LCD will
show “List is Empty”, if there is no received incoming call.
Method 2,
1) Press the left button of navigation button, you can see all the call history.
2) Press the left button again to switch between incoming Call, Outgoing Call
and Missed Call.
10
、
Call pickup
Call pickup is simulated from “Pickup” function processes from IPPBX. When A
call B with no reply after ring tones, C could pick up the call from A for B by
inputting the prefix and B’s phone No.
C needed to set the dial peer with prefix code as follow
To refer *1* as the set prefix code, C could get the call from A to B by dialing
*1*+B,
*1* prefix could be freely set as long as no confliction with other dialing rules.
Del Length is the digits of the prefix.
11
、
Join call
“A” could join in the conference call
,
by input a prefix plus a phone No. which is
already in the conference.
A requested to set the prefix code for dial peer as follow
To refer *2* as the set prefix code
,
“A” could join in the conference by dial *2*
plus the call No. which is already in the conference.
*2* prefix could be freely set as long as no confliction with other dialing rules.
Del Length is the digits of the prefix.