ATCOM AG-198, User Manual

Page: 35 / 40

AG-188 User Manual
35 / 40
4 4 4 4 FAQ FAQ FAQ FAQ
How How How How many many many many SIP SIP SIP SIP servers servers servers servers may may may may AG-198 AG-198 AG-198 AG-198 register register register register simultaneously? simultaneously? simultaneously? simultaneously?
AG-198 support 2 SIP servers and a IAX server. The Default server is SIP . If you want to
use the IAX server you must set IAX as default protocol in the IAX config page. IAX and
SIP can register simultaneously but not work simultaneously. If you set 2 SIP servers in
the SIP setting page , you can choose the route (server) by dialing plan which is edited by
you. Please see “How to use the dial rule?” for detail.
How How How How can can can can IIII know know know know the the the the AG-198 AG-198 AG-198 AG-198’’’’s s s s IP IP IP IP address? address? address? address?
Pick up the handset and then dial “#*111#”, and the AG-198 will promote you its IP
address.
How
How How
How to
to to
to use
use use
use AG-198
AG-198 AG-198
AG-198’’’’s
s s
s Lifeline
Lifeline Lifeline
Lifeline function?
function? function?
function?
AG-198 supports Lifeline function, you can use the same handset to place PSTN and
VoIP calls. First, you need to connect PSTN line to AG198's PSTN port,connect a analog
phone to Phone port. Then you can receive voip call and pstn call, and call default by sip.
If you want to call by pstn, you can dail * to switch to pstn mode.
If you want to replace the * rule, you need to set up as follow:
----Delete * rule in Digital Map( Advance->Digital Map), and add another rule,for
example:1
----Delete * rule in Dial Peer and add a new dial rule: set the phone number as 1, and
choose the Lifeline as the Call mode.Then apply.
Then when you want to place a PSTN calls, you can first press 1 to switch to the PSTN
line and then place your call as you normal do.
Why
Why Why
Why the
the the
the settings
settings settings
settings vanish
vanish vanish
vanish after
after after
after reboot?
reboot? reboot?
reboot?
Please go to Config Manage � Save Config to save your setting always.
How
How How
How to
to to
to use
use use
use the
the the
the dial
dial dial
dial rule?
rule? rule?
rule?
AG-198 provide flexible dial rule, with different dial-rule configure, user can easily
implement the following function:
----Replace, delete or add prefix of the dial number.
----Make direct IP to IP call
----Place the call to different SIP server according the prefix.
----Make PSTN calls use Lifeline function (Please refer “How can use the Lifeline function
of AG-198?”).
You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule:
Phone
Phone Phone
Phone Number:
Number: Number:
Number: The Number suit for this dial rule, cam be set as full match or prefix
match. Full match means that if the number user dialed is completely the same as this
number, the call will use this dial-rule. Prefix match means that if prefix of the number that
the user dials is the same as the prefix, the call will use this dial-rule, to distinguish from
the full match case, you need to add “T” after the prefix number in the phone number