AG-188 User Manual
32 / 40
3
3
3
3 IVR
IVR
IVR
IVR
User may pre-config AG-198 gateway using a normal phone connecting to AG-198.
please refer the below command:
Notice: all command below can be end with #
to speed response.
"#****"
/*reboot gateway*/
"#*000"
/*clear settings*/
"#*100"
/*set the IP type to static ip */
"#*101"
/*set IP type to DHCP */
"#*102"
/*set IP type to PPPoE*/
"#*111"
/*prompt gateway ip*/
"#*222"
/* prompt phone number*/
Below setting need reboot to take effect
"#*103"
/*change to bridge mode*/
"#*104"
/*change to router mode*/
"#*50192.168.1.117"
set WAN port IP address
"#*51192.168.1.1"
set default gateway IP
"#*52202.112.10.37"
set dns server
"#*53255.255.255.0” set netmask, use 255.255.255.0 if no be set
POST
POST
POST
POST Mode(safe
Mode(safe
Mode(safe
Mode(safe mode)
mode)
mode)
mode)
AG-198 provide safe mode. When there is booting problem because of setting problem or
firmware problem. User can restore the factory setting or upgrade to a new firmware to
solve this problem.
STEPS:
STEPS:
STEPS:
STEPS:
1. Download nc folder and save it on your computer
2. Connect your PC to the Lan port of AG-198, AG198 LAN ip is 192.168.10.1, and set
your computer ip as 192.168.10.X
3. Power up AG-198 and long-press "reset" key (beside PWR) immediately for 10s.
4. Run CMD on your computer
