AG-188 User Manual
11 / 40
�
Register Server Addr: Register address of public SIP server
�
Register Server Port: Register port of public SIP server
�
Account Name: Username of your SIP account
�
Password: Password of your SIP account
�
Phone number: Set phone number the same as Account Name
�
Display Name: Name displayed as Caller ID. If server has set the Caller ID,your
Caller ID will be the one which set by server not by phone.
�
Proxy Server Addr: IP address of proxy SIP server (SIP provider always use the same
IP for register server and proxy server, in this case you don’t need to configure the
proxy server information. )
�
Proxy Server Port: Signal port of SIP proxy
�
Proxy Username: proxy server username
�
Proxy Password: proxy server password
�
Domain Realm: SIP domain, enter the sip domain if any, otherwise AG-198 will use
the proxy server address as sip domain
�
Enable Register: Enable register or disable register
�
�
�
�
Advanced
Advanced
Advanced
Advanced Set:
Set:
Set:
Set:
�
Register Expire Time: Register expire time, default is 60 seconds. AT-640 will auto
configure this expire time to the server recommended setting if it is different from the
SIP server.
�
NAT Keep Alive Interval: Set examining interval of server, default is 60 seconds. If the
phone has enabled Nat Keep Alive, the phone will detect server after interval to check
if the server has response.
�
User Agent: Set the user agent if have, the default is VoIP Phone 1.0.
�
DTMF Mode: Select DTMF sending mode, there are three modes:
