ATC Sun Ray RF 1000w Operating And Installation Instructions Download Page 3

3

IMPORTANT INFORMATION

See  Section  “Installation  Instructions  –  Location  of  Radiator”  for  important  safety  notes 

regarding the positioning of the appliance.

•  To prevent overheating, do not cover the radiator.

•  You must not sit on the radiator.

•  This appliance is not intended for outdoor use.

•  If the power cord is damaged, it must be changed by the manufacturer, its after-sales 

service or persons qualified to do so, to avoid possible danger.

•  In case of breakdown or damage turn off the appliance at the main On/Off switch and 

notify the supplier.

•  The  radiator  should  not  be  located  underneath  an  electrical  connection.  The  electric 

supply line should be protected with a high sensitivity differential device (RCBO).

•  The radiator must be installed so that around the radiator there is sufficient space for 

proper circulation of hot air, with a minimum distance of 150 mm to curtains, furniture, etc.

•  Do not dry clothes or towels on the radiator nor leave fabrics, magazines, spray cans, 

volatile substances or similar objects within 250mm of the radiator.

•  Anyone who is in the bathtub or shower should not have access to the switches and other 

power operation devices. Always keep at least 0.6 m (UK) or 3.0 m (Ireland) between the 

radiator and the bath or shower.(UK: Outside zone 2, Ireland: Outside zone 3)

•  This heating apparatus holds a specific amount of special oil. Repairs where it is necessary 

to open the oil  tank must only be made by the manufacturer or ATC. ATC should  be 

contacted in case of any oil leakage.

•  A Fused Spur must be included in the wiring to the radiator.

•  This appliance can be used by children aged 8 years and above and persons with reduced 

physical, sensory or mental abilities or lack of experience and knowledge, if they have 

been given supervision or appropriate training regarding the use of the device in a safe 

way and they understand the dangers involved.

•  Children should not play with the appliance. Cleaning and maintenance should not be 

performed by unsupervised children.

•  Children under 3 years should be kept out of reach of the appliance unless they are 

constantly supervised.

•  Children between age 3 and younger than 8 years old should only turn on / off the device 

whenever it has been placed or installed at its normal operating position provided they 

are supervised or have received instructions concerning use of the appliance safely and 

understand the risks that the device has. Children from 3 years and under 8 years old 

should not plug in, regulate, clean the appliance or perform maintenance.

CAUTION

 - Some parts of this product can become hot and cause burns. Pay particular 

attention when children and vulnerable people are present.

WARNING

: In order to prevent overheating, do not cover this appliance. There has to be 

free movement of air around all surfaces of the appliance.

This symbol “DO NOT COVER”, is placed on the radiator as a reminder to 

the user. 

•  If the radiator is discarded, ensure it is recycled responsibly and follow any local provisions 

concerning recycling of oil.

•  A Safety Data Sheet is available from [email protected] on request.

Summary of Contents for Sun Ray RF 1000w





















Reviews: