10
22:00
OK
TIME SETTINGS
TIME
TIME
DATE
DST
TIME SETTINGS
OK
Day
Month
Year
01
01
2019
OK
TIME SETTINGS
DATE
DST
OFF
ON
OK
TIME SETTINGS
Tuesday
COPY
00:00 23:59
add period
ON OFF
mode
PROGRAM
OK
Tuesday
COPY
00:00 23:59 x
add period
ON OFF
mode
PROGRAM
OK
Tuesday
COPY
00:00 23:59 ok x
add period
ON OFF
mode
PROGRAM
OK
Wednesday
COPY
07:00 12:00 x
13:00 14:00 x
17:00 20:00 x
add period
ON OFF
mode
PROGRAM
OK
Copy Wednesday to:
Mon Tue
Wed
Thu
Fri Sat
Sun
OK CANCEL
OK
PROGRAM
OK
CONFIG
COMFORT
ECO
ANTI-FROST
PROGRAM
SETTINGS
COMFORT
Wednesday
add period
COPY
ON OFF
mode
OK
PROGRAM
Select TIME and press OK.
The current set time is shown on the display, to
change time move the underline to the Hours and
press OK.
The hours will flash, use the +/- keys to adjust
to the correct value and press OK, move to the
minutes and repeat to set the correct time. Once
complete press the CONFIG button to exit.
To set the Date select the Date menu, press OK
and enter the Day, Month and Year.
To exit the Date menu, press the CONFIG
button.
The Convector can automatically adjust the time
offset for Daylight savings. To set this option on or
off choose ON or OFF in the DST menu.
ENTERING A PROGRAM
Once the correct day
is selected, select add
period and press OK. The
underline will change to a
box around the times that
can be changed. Press OK
and the ON time will begin to
flash.
Change the On time to the
starting time the convector
should heat (7:00 in our
example), press OK and
the OFF time starts to flash.
Change the OFF time to the
end of the heating period
required (e.g:12:00).
Once the Times have
been Entered, chose the
temperature
set
point
required for the heating
period; either Comfort
or
Economy (Set above).
Any time periods outside
of Comfort or Economy are
automatically set to Anti-
Frost
.
Once the set point is chosen choose either “OK”
to save the setting or “x” to delete.
Extra heating times can be added by selecting
“add period” and repeating the above procedure.
Once the program for the
day is complete, it can be
copied to other days in the
week by selecting COPY
from
the
programming
screen.
The copy screen will
appear and the day that is
being copied from will not
be available. (Wednesday in
the example.)
Select the days to copy to and then move the
underline to “OK” on the screen and press the OK
button.
The screen will change back to the program
menu.
To Exit press CONFIG or leave the convector
and the display will revert to the current running
mode.
The AUTO mode of the Merida convector allows
you to run a program designed to accommodate
your lifestyle. To enter a new program into the
Heater press and hold the CONFIG button until the
CONFIG menu appears, then use the +/- buttons
to select PROGRAM and press OK.
To enter a program into the convector first select
the day of the week in the upper left corner of the
programming screen and press OK, change the
day to the day you want to program and press OK.
