Atari 65XE, Owner'S Manual

Page: 120 / 135

E.Troubleshooting
Q. I have set up my computer according to the instructions in the
Hooking It Up section, but when I t u r n the computer on, nothing
happens. What do I do now?
A. If the word READY doesn't appear when you turn on your
computer, retrace your steps. Make sure that all cords and cables are
plugged in securely and that power is coming into the system. Try
adjusting the fine-tuning knob on your TV. If you still don't get the
proper display or if the words MEMORY TEST appear on the TV screen,
your computer may need service. For the location of the nearest
ATARI Service center, contact your ATARI retailer or ATARI Customer
Relations, P.O. Box 61657, Sunnyvale, CA 94088.
Q. What do I do if the computer is on but the TV picture is distorted?
A. There are a number of things you should check:
• Make sure that the cable is plugged into the TV Switch Box and that
the Switch Box selector is turned to COMPUTER or GAME.
• The TV must receive a 300-OHM (300 ) signal from the Switch Box
to work properly with the computer. See if you have followed the
instructions in the section Installing the TV Switch Box.
• Make sure that the Channel switch on the computer is turned to the
same number as the channel selector on your TV set.
• Try a different cartridge in the Cartridge slot to determine whether
the software is working. Make sure that the cartridge is pressed
firmly into the slot.
Q. When I press the key, nothing happens. Why not?
A. is designed to work with specific programs. It gives you
access to helpful information when you need assistance. If the
computer doesn't respond, the program that you are using is probably
not set up for use with
115