AT&T TL96457, Complete User'S Manual

Page: 61 / 213

54
Telephone operation
Telephone operation
Make, answer or end a cell call
The TL96457/TL96477/TL96487/TL96497/TL96547 can be used to make or
answer calls on the cell line. You can connect a maximum of two Bluetooth
enabled cell phones to the telephone base. Both cell phones can be used on cell
calls at the same time.
Using a handset:
To make a cell call:
f
Press
CELL 1
or
CELL 2
. Enter the telephone number, then press
DIAL
.
To predial a cell call:
f
Enter the telephone number, then press CELL 1 or CELL 2 .
To answer a cell call:
f
Press HOME/
FLASH
, /SPEAKER , CELL 1 , CELL 2 or any dialing key
(0-9 or TONE ) .
To end a cell call:
f
Press OFF/
CANCEL
, or put the handset in the telephone base or charger.
Using the telephone base:
To make a cell call:
f
Press
CELL 1
or
CELL 2
. Enter the telephone number, then press
DIAL
.
To predial a cell call:
f
Enter the telephone number, then press CELL 1 or CELL 2 .
To answer a cell call:
f
Press HOME , CELL 1 , CELL 2 or any dialing key ( 0 - 9 or TONE ).
To end a cell call:
f
Press
CELL 1
or
CELL 2
.
Notes:
f
You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the
telephone base.
f
If you do not want to answer the call, press REJECT .
f
When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays
Cellular phone not connected. Please connect to proceed. . Refer to Bluetooth connection
from idle mode on page 26 and Connect/disconnect an active device on page 27.
f
Make a cell call using the cell lines of your telephone system instead of the remote voice control feature, if you need
to press dialing keys ( 0-9 , TONE , QUIET
#
) during a call.