manualshive.com logo in svg

AT&T TL96457, Complete User'S Manual

Share
Download
AT&T TL96457 Complete User'S Manual Download Page 180

173

Appendix

Screen messages

Quiet mode on

QUIET

 mode is on.

Quiet mode  

is off

QUIET mode is turned off. 

Rec mem full

The system recording time is full.

Rec mem low

The system recording time is low. 

Registering... 

Please wait

The handset is registering to the telephone base. 

Registration  

slots are full

The telephone base has the maximum of 12 handsets 

registered to it.

Registration  

failed

The handset registration is not successful. 

Remote voice 

control ended.

The remote voice control operation is ended.

Ringer off

The ringer is turned off. 

Ringer muted

The ringer is off temporarily while the device is ringing. 

Saved 

to directory

An entry has been successfully saved in the directory. 

Screened call

The Smart call blocker feature of the telephone has screened 

a call and is putting the call through to you.

Setting up  

Answering  

system

The telephone is playing voice guide.

Setting up 

Smart call blocker

The telephone base is playing voice guide to set up Smart call 

blocker.

Smart call blk 

screening...

The telephone is screening an incoming call.

Start voice  

guide to set  

up Smart call  

blocker now?

After you install your telephone or power returns following a 

power outage, the handset and telephone base will prompt 

you to set the date and time. After the date and time setting 

is done or skipped, the telephone base will then prompt if you 

want to set up the Smart call blocker feature via voice guide.

To register,  

see user manual

Screen display before handset registration.

Summary of Contents for TL96457






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands