Troubleshooting
If you have difficulty with your phone, please try the following
suggestions. For Customer Service, visit our website at
www.telephones.att.com
or
call
1 (800) 222-3111
.
In Canada, dial
1 (866) 288-4268
.
The handset registration is unsuccessful.
Follow the handset registration instructions to register the
handset again (see
Adding and registering handsets
on
page 8).
My telephone doesn’t work at all.
Make sure the power cord is securely plugged in.
Make sure you plug the battery connector securely into the
cordless handset.
Make sure you plug the telephone line cord securely and firmly
into the telephone base and the telephone wall jack.
Charge the battery in the cordless handset for at least 16 hours.
For optimum daily performance, return the cordless handset to
the telephone base or charger when not in use.
If the battery is depleted, it may take approximately 30 minutes
to charge the handset before it shows
Low battery
. See page 6
for details.
Reset the telephone base. Unplug the electrical power. Wait for
approximately 15 seconds, then plug it back in. Allow up to one
minute for the cordless handset and telephone base to reset.
You may need to purchase a new battery. Refer to
Battery
installation and charging
in this user’s manual on pages 6-7.
The display shows L1>NO LINE or L2>NO LINE. I cannot get a
dial tone.
Try all the suggestions mentioned above.
If the previous suggestions do not work, disconnect the
telephone line cord from your telephone and connect the
telephone line cord to another telephone.
•
•
•
•
•
•
•
•
•
•
Appendix
10
