61
Appendix
You can deregister handsets. You may need to deregister your handsets if:
You have five registered handsets and need to replace a handset.
-OR-
You wish to change the designated handset number of your registered
handsets.
You must first deregister ALL the handsets, and then register each handset
you wish to use again, one at a time.
Please read carefully through all the instructions on
this page before beginning the deregistration process.
To deregister all handsets:
Press and hold
HANDSET LOCATOR
on the
telephone base for about 10 seconds (until the
IN USE
light starts to flash), then release the
HANDSET LOCATOR
button.
Immediately press
HANDSET LOCATOR
again.
You must press
HANDSET LOCATOR
while the
IN USE
light is still flashing. (The light flashes for
about seven seconds. If the light stops flashing,
start again with step 1 above.)
It takes up to one minute to complete the
deregistration process. When complete, the handset
screen alternately shows
1.Press HS LOC on base 4 sec
and
2.Then press # on handset
.
To register the handset(s) to the telephone base again,
follow the registration instructions in
Adding and
registering a handset
on page 60.
NOTES:
If the deregistration process is not successful, you might need to reset the system and try
again. To reset, unplug the power from the telephone base and plug it back in.
You cannot deregister the handset(s) if any system handset is in use.
•
•
1.
2.
3.
•
•
Deregistering all handsets
HANDSET 2
10/20
10:30
PM
2.Then press #
on handset
--/--
--:--
1.Press HS LOC
on base 4 sec
--/--
--:--
