manualshive.com logo in svg

AT&T SB3014, User Manual

Share
Download
AT&T SB3014 User Manual Download Page 13

Getting started

9

NOTE:

 If you are on a phone call in low battery mode, you hear 4 short beeps  

every minute. 

NOTE:

 The status indicator on the wireless mic turns orange when charging, and turns off 

when the wireless mic is fully charged.

Battery installation and charging

Install the battery, as shown below. The battery needs charging when it is 
newly installed into the wireless mic, or the status indicator on the wireless 
mic flashes orange. For best performance, keep the wireless mics on the 
charging cradles when not in use. The battery is fully charged after eight 
hours of continuous charging.

The status indicator on the wireless mic turns orange when charging, and 
turns off when the battery is fully charged.

1.  Place the battery with the label 

THIS SIDE UP

 facing up onto the battery 

compartment. The status indicator flashes orange once in three seconds.

2.  Slide the battery door until it clicks into place.

3.  Place the wireless mics on the charging cradles until they are flush.

IMPORTANT INFORMATION

1.  Use only the supplied rechargeable battery or replacement battery (model BT191665). 

To order, visit our website at 

www.smbtelephones.att.com

 

or call  

1 (800) 222-3111

. In Canada, dial 

1 (866) 288-4268

.

2.  If you do not use the wireless mics for a long time, disconnect and remove the battery 

to prevent possible leakage.

Summary of Contents for SB3014


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands