AT&T MLC-5 Supplementary Manual Download Page 7

OFTEN USED FEATURES

Forward and Follow Me

To program:

1.   

Label a button.

2.   

Slide T/P switch to P.

3.   

Press labeled button.

4.   

Dial 

❉ 

33.

5.   

Slide T/P switch to center.

To forward calls to an extension:

1.   

Press an  ICOM or SA button.

2.   

Lift handset.

3.   

Press programmed button.

4.   

Dial extension.

To forward calls to an outside
number:

1.   

Press an  ICOM or SA button.

2.   

Lift handset.

3.   

Press programmed button, or

press  Feature  and dial 33.

4.   

Dial on phones with ICOM

buttons or the dial-out code
on phones with  SA buttons.

5.   

Dial phone number, then dial #.

To set up follow me from another
extension:

1.   

Press an  ICOM or SA button.

2.   

Press Feature and dial 34.

3.   

Dial your extension.

To cancel forward and follow me:

Call Waiting

Single beep means inside call
waiting; two beeps mean outside
call waiting.

To turn call waiting on/off:

1.   

Press  Feature  and dial 00.

2.   

Press any  ICOM or SA button.

3.   

Dial 

❉ 

11 to turn on or 

❉ ❉ 

11

to turn off.

4.   

Press  Feature  and dial 

❉ 

00.

To complete a call and answer
call waiting:

1.   

When you hear Call Waiting
tone, press On/Off.

2.   

Lift handset when phone rings.

To put call on hold and pickup
call waiting:

1.   

Press Hold.

2.   

Press  ICOM or SA Originate

Only button. (You must have
ICOM Originate Only or SA
Originate Only  
button
available to pick up call.)

3.   

Press  Feature  and dial 87.

4.   

To return to call on hold, press

button with fast flashing light.

Pickup

●   

From your extension:

1.   

Press  Feature.

2.   

Dial 33 and your extension.    To program:

●   

From one extension:

1.

1.   

Press  Feature.

2.

2.    

Dial 

❉  

34 and your extension.

3.

●   

Sent from all extensions:

4.

1.   

Press Feature.

2.   

Dial 

❉ 

34 

❉ 

.

Label a button.

Slide T/P switch to P.

Press labeled button.

Select one of the following:

●   

Dial 

❉ 

9.  For a specific

line or extension, dial line
number or extension.

●  

For group pickup,

dial 

❉ 

88.

Park

To program:

See Programming Buttons.
To use park and speakerphone page:

1.   

Park the call.

●   

Press programmed Park

button.

●   

Press  Transfer,  dial your

extension, and press  Transfer
again or hang up.

2.   

Set up page.

●   

For speakerphone page:

1.

2.

Press appropriate Group Page
or Page All button, or press
any ICOM or SA button and
dial Group Page or Page All
extension:
Announce call and give
your extension.

●  

For loudspeaker page:

Loudspeaker pages can be
made only by using a pro-
grammed Loudspeaker Page
button, which must be pro-
grammed by your company.

1.  

Press  Loudspeaker Page

button.

2.  

Announce call and extension

where call is parked.

To pick up a parked call:

1.   

Lift handset.

2.   

Press programmed Pickup

button, or press Feature and
dial  9.

3.   

Dial extension where call is parked.

5.   

Slide T/P switch to center.

To use:

●   

Press programmed button, or

press  Feature  and dial 9. If
button not programmed for
specific line or extension, you
can manually dial line number
or extension, if desired.

●   

Group Pickup can also be

accessed by pressing  Feature
and dial  88.

Summary of Contents for MLC-5









Reviews: