AT&T MERLIN LEGEND MLX- 10D Operator'S Manual Download Page 112

Page: 112 / 137

Programming Codes

Use the programming codes in this appendix to program

features onto unlabeled line buttons for one-touch feature use
or to turn features on and off. You can use any unlabeled line

button to program features. See Chapter

for instructions on

programming features.

You can program features using the console display or with
the programming codes that follow.

The following list includes programmable features you and co-
workers can use. The features

explained in this book

are

checked

. For information on the features that are

not

explained in this book, see the MLX-10D,™ MLX-28D,™

and

MLX-20L,™ Digital/lSDN Display Telephones User’s Guide.

Programming Codes C-1

Summary of Contents for MERLIN LEGEND MLX- 10D










































































































































Search results

Summary of Contents for MERLIN LEGEND MLX- 10D

Reviews:

Related manuals for MERLIN LEGEND MLX- 10D

Brands by name

Popular brands

AT&T MERLIN LEGEND MLX- 10D, Operator'S Manual

Search results

Summary of Contents for MERLIN LEGEND MLX- 10D

Reviews:

Related manuals for MERLIN LEGEND MLX- 10D

Brands by name

Popular brands