OFTEN USED FEATURES
Paging
To program Speakerphone paging buttons:
1.
2.
3.
4.
5.
To use
1.
2.
3.
4.
To use
1.
2.
3.
4.
Label a button with Group-Page (name) or
Page All.
Press Feature and dial 00.
Press labeled button.
Dial
✼
22 and Group Page or Page All extension.
Press Feature and dial
✼
00.
Speakerphone paging:
Press an ICOM or SA button.
Lift handset.
Press programmed button or dial company-pro-
vided Group Page or Page All number.
Make announcement after beep.
Loudspeaker paging:
Lift handset.
Press Loudspeaker Page button or press
Feature and dial 9 and Loudspeaker Page
line number.
Dial code for company-defined zone.
Make announcement.
Personal Speed Dial
Program 2-digit codes for numbers you dial most often,
then use feature buttons to use these codes to dial a
number.
To program personal speed dial codes:
1.
Press Feature and dial 00.
2.
Dial # and 2-digit code from 01 to 24.
3.
Dial
✲
21.
4.
Dial phone number, including dial-out codes.
(see Special Characters Table).
5.
Repeat Steps 2-4 to program additional codes.
6.
Press Feature and dial
✼
00.
To use:
1.
Select appropriate line button.
2.
Press Feature.
3.
Dial 2-digit code (01-24).
Coverage
For coverage, a co-worker must program an individual
coverage button on his/her phone for either primary or
secondary coverage. (Secondary coverage offers a
two-ring delay so you may answer before calls are
covered. ) You can program buttons for Coverage OFF
or Coverage VMS OFF. To prevent coverage of inside or
inside/outside calls, use the following procedure:
To program which calls are covered:
1.
Press Feature and dial 00.
2.
Press an ICOM or SA button.
3.
Dial
✼
48 for inside and outside calls,
or dial
✼✼
48 for outside calls only.
4.
Press Feature and dial
✼
00.
To program a coverage off button:
1.
Label a button.
2.
Press Feature and dial 00.
3.
Press button to be programmed.
4.
Dial
✼
49 for coverage OFF or
✼
46 for
coverage VMS OFF.
5.
Press Feature and dial
✼
00.
To use buttons:
●
Toggle On the Coverage VMS OFF button to
prevent outside calls from being sent to voice mail.
●
Toggle On the Coverage OFF button to stop calls
from being sent to coverage.
Copyright © 1992 AT&T
MLX-10 is a trademarks of AT&T
MERLIN LEGEND is a trademark of AT&T