AT&T MERLIN LEGEND MLX-10 Non-Display Telephone, Quick Reference Manual, Page: 5 / 8

OFTEN USED FEATURES
Do
Not Disturb
System Speed Dial
To program:
See Programming Buttons.
To use:.
●
Last
Toggle the programmed
button on or off.
Number Dial
To program:
See Programming Buttons.
To use:
1.
2.
Press same type of button
used to place the first call,
(for example, ICOM or SA ).
Press programmed
button, or press Feature
and dial 84.
Saved Number Dial
To program:
See Programming Buttons.
To use:
1.
Press programmed button
before hanging up,
2.
To place call, press same
type of button used to
place the call, for example
ICOM or SA.
3.
Press programmed button
to redial.
Use company-programmed 3-digit
codes to dial phone numbers. Ask
your system manager for a list of
numbers and their associated
codes.
To program system speed dial
button:
1.
Label a button.
2.
Press Feature and dial 00.
3. Press labeled button.
4.
Dial
✼
24.
5. Dial company supplied 3-
digit code.
To use:
1.
Lift handset or press
Speaker.
2. Press programmed button,
or press Feature and dial
3-digit, company-supplied
speed dial codes.
Special Characters Table
Features that dial numbers automati-
cally may need special characters to
allow for correct dialing or system
response.
Auto Dial
To program inside/outside Auto
Dial buttons:
1.
Label a button.
2.
Press Feature and dial 00.
3.
Press labeled button.
4.
Dial
✼
22 for inside
numbers and
✼
21 for
outside numbers.
5.
Dial extension or outside
number (include complete
dialing sequence, see
Special Characters Table).
6.
Repeat Steps 1, 3, 4, and
5 to program additional
buttons.
7.
Press Feature and dial
✼
00.
To use Auto Dial button for ringing
calls:
●
Press programmed Auto
Dial button.
To use inside Auto Dial button for
voice-announced calls:
1.
Press ICOM Voice or SA
Voice button.
2.
Press programmed Auto
Press.. Means...
Drop
Hold
Conf
##
#
Stop. Halts dialing sequence to
allow for system response.
Pause. Inserts 1.5 sec. pause
in dial sequence. Multiple
consecutive pauses allowed.
Flash. Sends switchhook flash.
Must be first entry in sequence.
For Extension Programming
only: End of Dialing. Use to
signal end of dialing sequence
or use to separate grouped
digits, for example, account
codes from number dialed.
End of Dialing. Use to signal
end of dialing sequence or use
to separate grouped digits,
for example, account codes
from number dialed.
Dial button.
3.
Begin talking after the