Caller ID Feature Setup
Programming Home and Local Area Codes
Your “home area code” is the area code from which you are dialing.
Numbers called within your home area code do not require you to dial a
“1” or the area code before dialing the telephone number. “Local area
codes” are area codes that require no “1” before dialing the telephone
number; however, the area code must be dialed.
Always program your home area code, and, if you need them, your local area
codes (up to four). Programming these area codes will change how
numbers are displayed in the call history, and will allow for correct
operation of the Display Dial feature (see page 38).
1
Make sure the
is not displayed.
2
Press
U >
.
3
Use the softkey to select
SETUP
.
4
Select
DONE
until the screen displays
AREA CODE 1
.
5
Use the keypad to enter your home area code.
NOTE:
If you must dial the area code to complete a call in your home
area, enter “000” for
AREA CODE 1
.
6
Select
CODE 2
to reach
AREA CODE 2
(the screen displays any
current local area code stored here). Use the keypad to enter a
three-digit local area code.
7
Continue as in
Step 4
for area codes 3, 4 and 5 as needed
— OR —
Select
DONE
to move to the next feature (begin at
Step 5
)
— OR —
Press
U
to exit.
Turning Off Caller ID with Call Waiting
You must subscribe to Caller ID with Visual Call Waiting as a
combined
service in order for this feature to work. If you don’t have Caller ID with
Visual Call Waiting service, you should turn this feature off (the phone
comes with the feature on).
1
Make sure the
is not displayed.
2
Press
U >
.
3
Use the softkey to select
SETUP
.
4
Select
DONE
until the screen displays
CIDCW: ON
.
5
Select
CHANGE
. The screen displays
CIDCW: OFF
.
6
Select
DONE
to move to the next feature (begin at
Step 5
)
— OR —
Press
U
to exit.
FEATURE SETUP
8
