manualshive.com logo in svg

AT&T EL52200, User Manual

Share
Download
AT&T EL52200 User Manual Download Page 9

4

Getting started

Telephone base and charger installation

Install the telephone base and charger, as shown below. If you subscribe 
to high-speed Internet service (DSL - digital subscriber line) through your 
telephone line, you must install a DSL filter between the telephone line cord 
and the telephone wall jack. The filter prevents noise and caller ID problems 
caused by DSL interference. Please contact your DSL service provider for 
more information about DSL filters.

The telephone base comes ready for tabletop use. If you want to mount 
your telephone on a wall, refer to 

Wall-mount installation 

on pages

 

7-8 for 

details.

ImPoRTAnT InFoRmATIon:

Use only the power adapters provided with this 
product. To obtain a replacement, visit our website 
at

 

www.telephones.att.com

 

or call

 

1 (800) 222-3111

. In Canada, dial

  

1 (866) 288-4268

.

Plug the large end 
of the smaller power 
adapter into an 
electrical outlet not 
controlled by a wall 
switch.

Ensure the small end 
of the smaller power 
adapter is plugged 
into the power jack 
on the bottom of the 
charger.

Plug the large end 
of the base power 
adapter into an 
electrical outlet not 
controlled by a wall 
switch.

Plug the small 
end of the larger 
power adapter into 
the power jack on 
the bottom of the 
telephone base.

Electrical outlet not 
controlled by a wall 
switch

A DSL filter (not included) 
is required if you have DSL 
high-speed Internet service. 
The DSL filter must be 
plugged into the telephone 
wall jack.

Route the cords 
through the slots.

Plug one end of the 
telephone line cord 
into the 

TEL. LInE

 

jack on the bottom 
of the telephone 
base.

Telephone 
line cord

Plug the other end of the 
telephone line cord into a 
telephone wall jack.

Telephone wall jack

Summary of Contents for EL52200




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands