manualshive.com logo in svg

AT&T EL52200, User Manual

Share
Download
AT&T EL52200 User Manual Download Page 11

6

Getting started

Battery installation and charging

Battery charging

Once you have installed the battery, the screen indicates the 
battery status (see the following table). If necessary, place 
the handset in the telephone base or charger to charge 
the battery. For best performance, keep the handset in the 
telephone base or charger when not in use. See  

Technical specifications

 on page 74 for battery charging 

and operating times.

If the screen is blank, you need to charge the handset without interruption 
for at least 30 minutes to give the handset enough charge to use the 
telephone for a short time. The screen shows 

LoW BATTERy

 until you 

have charged the battery without interruption for at least 30 minutes. The 
following table summarizes the battery charge indicators and actions to take.

notes:

If you are on a call in low battery mode, you hear four short beeps every 50 seconds.
When you place the handset in the telephone base or charger, if no battery is installed 
in that handset, the 

CHARGE

 light is off and the screen shows 

no BATTERy

. Follow the 

instructions in 

Battery installation

 on page 5 to install the battery.

•
•

HANDSET 1

16 MISSED CALLS

10:30

PM

11/20

Battery status icon

Battery indicators

Battery status

Action

The screen is blank or shows 

PLACE In CHARGER

.

Battery has no or very little 
charge. The handset cannot 
be used.

Charge without interruption 
until the screen shows  

LoW BATTERy

 or 

HAnDSET X

 

(at least 30 minutes).

The screen shows 

LoW BATTERy

 and   flashes.

Battery has enough charge 
to be used for a short time.

Charge without interruption

 

until the screen shows 

HAnDSET X 

(at least  

30 minutes).

The screen shows 

HAnDSET X

 

and the battery icon shows 

,   or  .

Battery is charged.

To keep the battery charged, 
place it in the telephone base 
or charger when not in use.

Summary of Contents for EL52200




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands