manualshive.com logo in svg

AT&T EL52200, User Manual

Share
Download
AT&T EL52200 User Manual Download Page 76

71

Appendix

California Energy Commission battery charging testing instructions

This telephone is set up to comply with the energy-conserving standards right out of the box. These 
instructions are intended for California Energy Commission (CEC) compliance testing only. When the 
CEC battery charging testing mode is activated, all telephone functions, except battery charging,  
will be disabled.

To activate the CEC battery charging testing mode:

Unplug the telephone base power adapter from the power outlet. Make sure all handsets are 
plugged with charged batteries before proceeding.
While you press and hold   

HAnDSET LoCAToR

, plug the telephone base power adapter back to 

the power outlet.
After about 20 seconds, when the 

In USE

 light starts flashing, release   

HAnDSET LoCAToR 

and 

then press it again within two seconds.

The process takes up to one minute to complete. When the phone successfully enters the 
CEC battery charging testing mode, the 

In USE

 light turns off and all handsets display 

1.PRESS HS LoC on BS 4 SEC 2.THEn PRESS # on HAnDSET

.

When the phone fails to enter this mode, repeat all the steps mentioned above.

noTE:

 The telephone base will be powered up as normal if you fail to press   

HAnDSET LoCAToR 

within two seconds in Step 3.

To deactivate the CEC battery charging testing mode:

Unplug the telephone base power adapter from the power outlet, then plug it back in. The 
telephone base is powered up as normal.
Press and hold   

HAnDSET LoCAToR

 on the telephone base until the 

In USE

 light turns on.

Press 

#

 on the handset and the handset displays 

Registering... Please wait

.

The CEC battery charging testing mode will be deactivated when the handset registration  
is successful.

1.

2.

3.

1.

2.
3.
4.

BC

Summary of Contents for EL52200




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands