AT&T CRL81112 Page 6 Complete User'S Manual Download

Page: 6 / 71

CHARGE indicator

On when the handset is charging

in the telephone base or charger.

CID/VOLUME

Press

CID

to show caller ID

history (page 38).
Press to scroll down while in menus.
While entering names or numbers,

press to move the cursor to the left.
Press to decrease the listening

volume when on a call (page 22).

PHONE/FLASH

Press to make or answer a call.
During a call, press to answer an

incoming call when you receive a

call waiting alert (page 22).

While reviewing a caller ID log

entry, press repeatedly to add or

remove 1 in front of the telephone

number before dialing or saving it

in the directory (page 39).
Press and hold to set (page 13)

or dial your voicemail number

(page 35).

MUTE/DELETE

During a call, press to mute the microphone (page 22).
While reviewing the caller ID history, the directory or the

redial memory, press to delete an individual entry (page 39,

page 33 and page 20 respectively).
While predialing (page 19), press to delete digits.

/SPEA�ER

SPEA�ER

Press to switch between the

speakerphone and the handset

(page 20).

Quick reference guide - handset

QUIET # (pound key)

Press repeatedly to display other

dialing options when reviewing a

caller ID log entry (page 39).
Press and hold to enter the

QUIET mode setting screen, or to

deactivate QUIET mode (page 18).

OFF/CANCEL

During a call, press to hang up.
While in a menu, press to cancel

an operation, back up to the

previous menu, or exit the menu

display, or press and hold this

button to exit to idle mode.
Press and hold while the telephone

is not in use to erase the missed

call indicator.

MENU/SELECT

Press to show the menu.
While in the menu, press to

select an item or save an

entry or setting.

DIR/VOLUME

Press

DIR

to show

directory entries (page 32).
Press to scroll up while in menus.
While entering names or

numbers, press to move the

cursor to the right.
Press to increase the listening

volume when on a call (page 22).

TONE

Press to switch to tone dialing

temporarily during a call if you

have pulse service (page 24).

Getting started

Audio Assist

is a registered trademark of Advanced American Telephones.

AUDIO ASSIST®

Voices will sound louder and
clearer when you press

AUDIO

ASSIST

while on a call using the

handset (page 24).

REDIAL/PAUSE

Press repeatedly to view the last

10 numbers dialed (page 20).
While entering numbers, press

and hold to insert a dialing pause

(page 30).

Summary of Contents for CRL81112








































































Search results

Summary of Contents for CRL81112

Reviews:

Related manuals for CRL81112

Brands by name

Popular brands

AT&T CRL81112, Complete User'S Manual

Search results

Summary of Contents for CRL81112

Reviews:

Related manuals for CRL81112

Brands by name

Popular brands