Answering system
Call screening
Use this feature to choose whether incoming messages
can be heard over the speaker when they are being
recorded. If you turn call screening on, you hear the
incoming message. While monitoring an incoming message,
you can answer the call by pressing
PHONE/
FLASH
or
/SPEA�ER
SPEA�ER
on the handset, or
/SPEA�ER
SPEA�ER
on the
telephone base.
To change the setting:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode,
press
MENU/
SELECT
to enter the main menu.
2. Press
q
CID
or
p
DIR
to scroll to
Answering sys
, then
press
MENU
/SELECT
.
3. Press
q
CID
or
p
DIR
to scroll to
Ans sys setup
, then
press
MENU
/SELECT
.
4. Press
MENU
/SELECT
to select
Call screening
.
5. Press
q
CID
or
p
DIR
to choose
On
or
Off
.
6. Press
MENU
/SELECT
to save the setting. You hear a
confirmation tone.
NOTE:
For more information on call screening, see page 86.
Answering system settings
Answer ON/OFF
>Ans sys setup
p
q
>
Call screening
# of rings
p
q
CALL SCREENING
>On
p
q
79
Answer ON/OFF
>Ans sys setup
p
q
>
Call screening
# of rings
p
q
CALL SCREENING
>On
p
q
