Multiple handset use
Push-to-talk (PTT)
Make an outgoing call during PTT call
During a one-to-one PTT call, press
PHONE/
FLASH
on your handset or
/SPEA�ER
on your telephone base to get a dial tone. The PTT call
ends automatically.
During a one-to-group PTT call, press
PHONE/
FLASH
on the initiating
handset or
/SPEA�ER
on the initiating telephone base. The PTT call
ends automatically and you get a dial tone.
During a one-to-group PTT call, press
PHONE/
FLASH
on any one of the
destination handsets or press
/SPEA�ER
on the destination telephone
base. That device gets a dial tone. The PTT call continues for the rest of
the PTT participants.
End or leave a PTT call
For one-to-one PTT calls, both initiating and destination devices can end the
PTT call. For PTT calls to multiple devices, the initiating device can end the
PTT call. If any one of the destination devices leaves the PTT call, the call
continues until all participants or the initiator hangs up.
Press
OFF/
CANCEL
on the handset, or press
CANCEL
on the telephone
base. The screen shows
Push to talk Ended
.
-OR-
Place the handset in the telephone base or charger, then the handset
return to idle mode.
NOTE:
After
PUSH TO TAL�
on the handset or
PTT
on the telephone base is released, the PTT
call remains open for a short time. If no one presses
PUSH TO TAL�
on the handset or
PTT
on
the telephone base
within ten seconds, the PTT call ends automatically.
•
•
•
57
