12
Version 3.0 12/2020
B. Federal Communications Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible Party:
AT&T/AT&T TV
2230 E. Imperial Hwy
El Segundo, CA 90245
1-800-531-5000
• Trade Name: AT&T/AT&T TV
• Model Number: A21KW and RC82V
Federal Communications Commission (FCC): This equipment complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by removing and applying power to the equipment, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
• CAUTION: Changes or modifications not expressly approved by the manufacturer responsible
for the compliance could void the user’s authority to operate the equipment.
The user may find the following booklet, prepared by the Federal Communications Commission,
helpful: “How to Identify and Resolve Radio and TV Interference Problems.” This booklet is available
from the U.S. Government Printing Office, Washington, DC. To meet FCC requirements, only
peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with Class
B limits may be attached to this device. Operation with noncertified peripherals is likely to result
T:8.5"
T:11"
ATT081940_Osprey Product Manual_English_2R.indd 12
ATT081940_Osprey Product Manual_English_2R.indd 12
12/11/20 11:22 AM
12/11/20 11:22 AM
