Talking Caller ID
You can record personalized announcements (Talking Caller ID) to be
played from the speaker at the base each time a call is received from a
telephone number or call type you program.
For example,
you could record an Talking Caller ID announcement to say
“
Mom and Dad
” each time you receive a call from your parents’ telephone
number.
You can program up to 10 Talking Caller ID announcements. Each
announcement can be up to five seconds long.
Recording a Talking Caller ID (
LOCAL
) Announcement
1
Press
U
.
2
Use the softkey to select
DIR
.
3
Select
ANS SYS
.
4
Select
LOCAL
.
5
Select
ADD
. The screen displays
ENTER NUMBER:
.
6
Use the keypad to enter the digits (up to 24) of the incoming phone
number for
LOCAL
, then select
DONE
— OR —
Press
>
, then select
DONE
for
PRIVATE CALL
information
— OR —
Press
> >
, then select
DONE
for
UNKNOWN CALL
information.
7
Select
RECORD
.
8
Using the handset, record a
LOCAL
announcement up to five
seconds long, that you will hear at the base when you receive a
call from the number or call type you programmed.
9
Select
STOP
when you are finished recording. The system plays
the announcement you just recorded.
10
The screen displays the number or call type matched to the
LOCAL
announcement. To change the announcement, select
RE-RECORD
— OR —
Select
DONE
. If you have not recorded all Talking Caller ID (
LOCAL
)
Announcements, begin again at
Step 4
.
NOTE:
You do not need to enter the “1” when storing numbers you
usually dial with a 1 prefix.
16
FEATURE SETUP
9355_book_1ATT 7/12/99 2:25 PM Page 16
