AT&T 80-5727-00 - E5927B - 5.8GHz Dual Handset Answering System User Manual Download | Manualshive

Page: 55 / 66

background image

51

Appendix

51

Appendix

Important Safety Instructions

This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual.
Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.

Safety Information
•

Read and understand all instructions in the user’s manual. Observe all

markings on the product.

•

Avoid using a telephone during a thunderstorm. There may be a slight

chance of electric shock from lightning.

•

Do not use a telephone in the vicinity of a gas leak.

If you suspect a gas leak, report it immediately, but use a telephone away from the
area where gas is leaking. If this product is a cordless model, make sure the base is
also away from the area.

•

Do not use this product near water, or when you are wet. For example,

do not use it in a wet basement or shower, or next to a swimming pool, bathtub,
kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the
product comes in contact with any liquids, unplug any line or power cord immedi-
ately. Do not plug the product back in until it has dried thoroughly.

•

Install this product in a protected location where no one can trip over any

line or power cords. Protect cords from damage or abrasion.

•

If this product does not operate normally, read “Troubleshooting” in the

user’s manual. If you cannot solve the problem, or if the product is damaged, refer

to the Limited Warranty. Do not open this product except as may be directed in
your user’s manual. Opening the product or reassembling it incorrectly may expose
you to hazardous voltages or other risks.

•

If this product has user-replaceable batteries, replace batteries only as

described in your user’s manual. Do not burn or puncture batteries — they

contain caustic chemicals.

•

If this product has a three-prong (grounding) plug or a polarized plug

with one wide prong, it may not fit in non-polarized outlets. Do not defeat

the purpose of these plugs. If they do not fit in your outlet, the outlet should be
replaced by an electrician.

CAUTION:

Use only the power adapter provided with this product. To obtain a replacement, call 1-800-222–3111.

In Canada, call 1-866-288-4268.

«
...
53
54
55
56
57
...
»

Summary of Contents for 80-5727-00 - E5927B - 5.8GHz Dual Handset Answering System



































































Reviews:

No comments

Related manuals for 80-5727-00 - E5927B - 5.8GHz Dual Handset Answering System

Brand: E-MetroTel Pages: 4

Brand: Yealink Pages: 2

DVX-2000MS-10P - VoiceCenter IP Phone Sys...

Brand: D-Link Pages: 20

Brand: Skil Pages: 11

Brand: Uniden Pages: 47

Brand: Yealink Pages: 347

Brand: Serene Pages: 2

Brand: AT&T Pages: 2

Brand: One Talk Pages: 26

Brand: Radio Shack Pages: 24

Brand: Easydive Pages: 2

Brand: BELGACOM Pages: 33

TRU12803 Series

Brand: Uniden Pages: 68

Brand: Aastra Pages: 36

Brand: Aiphone Pages: 4

Brand: BellSouth Pages: 47

Brand: GE Pages: 32

Brand: GE Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands