8
For two single-line wall jacks with two single-line phones:
(To use this installation option, you’ll need to use the 2-Line Adapter.)
a
Plug the 2-Line Adapter into the wall jack that will be used as
LINE 1
.
b
Plug one end of the telephone line cord with blue plugs into the adapter jack
labeled
L INE 2
. Plug the other end of the cord into the other wall jack.
c
Plug one end of a telephone line cord with clear plugs into the adapter jack labeled
PHONE
. Plug the other end of the cord into the system jack labeled
L1/L2
.
d
Plug the line cord from one single-line phone into the system jack labeled
SET 1/(SET 2)
. This phone is connected to the Line 1 telephone number.
e
Plug the line cord from the other single-line phone into the system jack labeled
SET 2
. This phone is connected to the Line 2 telephone number.
f
Go to
Step 2
, “Connect the power cord.”
INSTALLATION
L1/L2
Strain
Relief Tab
Standard
Electrical
Outlet
SET 1/(SET 2)
SET 2
Modular
Telephone Jack
Telephone Line Cord
2-Line Adapter
1782_book_1AT&T 5/1/00 7:35 PM Page 8
