Atak DVD1100, Instruction Manual

Page: 13 / 17

:Auto
:480p/576p
:720p
:1080i
Aspect Ratio
View Mode
TV System
Video Out
Brightness
Language
Video
Rating
Mixc
Sharpness
HD Resolution
HD Jpeg mode
:1080p
HD RESOLUTION:
Using the HDMI video output requires the use
of a HDMI cable (not included). Your TV set
must must also support high-definition video
as well.
You can select Auto, 480p/576p, 720p, 1080i,
1080p to make the picture
much clearer via
the HDMI cable.
HD:
This is only achieved by using a HDMI cable
(not included).
MISC Setup
Language
Video
Rating
Misc
Use Default Settings
USE THE DEFAULT SETTINGS:
During use, if you want to return to the factory
default settings, please select USE DEFAULT
SETTINGS, and the player will automatically
return to the factory settings.
PARENTAL CONTROL
Language
Video
Rating
Misc
Parental Control
Set Password
SET PASSWORD:
The default password is 0000, after this correct
password is entered, you can then change the
password to one of your choice. Your password
is needed to change the Parental Control
settings.
To restrict the viewing of certain movie ratings,
Parental Controls can be accessed on this menu.
In order to set or change these settings, the password
make sure the password is then set to OFF on the
menu, then you can set / change Parental Controls.
1.Kid Safe
2.G
3.PG
4.PG-13
5.PG-R
6.R
7.NC-17
8.Adult
must first be entered. After entering the password,