www.AtairCanopies.com
Dragon User Manual
Page 17 Atair Canopies
Once you have assembled and tightened each connector link on the corresponding
riser it is time to focus on the steering lines. Starting from the trailing edge of the
canopy take each steering line and follow it down to the risers, ensuring it is clear and
not interfering with the other line sets. Route the left steering line through the guide
rings on the left rear riser and repeat the process for right steering line /right riser.
Section 6.1: Toggle Assembly
Figure 1: Pass the control line through the toggle’s
grommet from the Velcro side of the toggle.
Figure 1
Figure 2: Then thread the bottom of the
toggle through the attachment loop,
pulling the slack control line back through
the grommet.
Figure 2
Figure 3: The assembled toggle should look like
this.
Figure 3
