43
④
Next, enter the file name of the created user scale in the blank next to File name.
A. Move the cursor to the user scale name and click on it with the left button of your mouse.
B.The user scale name will be automatically entered in the blank next to File name.
C.If the user scale name is entered next to File name, move the cursor to Open and click on it with the left
button of your mouse. Data transfer starts
Fig. 11-25
⑤
Click Open in Fig. 11-25 to start the data transfer.
The instrument will beep once the transfer is completed, and then, the data as programmed in the
PRM-
100αwill be displayed on the screen, below the original data.
Compare the two sets of data and make sure that the programming has been executed accurately (Fig.
Fig. 11-26
(4-7) Confirming Data
Take measurements after the Conc data are programmed to confirm that the data have been transferred
successfully.
Take reset the Conc's "bIAS" after the Conc data are programmed.
Data as programmed in the PRM-
100α
Original data exported
A
B
C
Summary of Contents for 3574
Page 2: ......
