-5-
2. Confirmation of package
3. Names and roles of each part
Please confirm the following contents of the package when the unit is unpacked.
(1) Liquid Crystal Display (LCD)
(3) ZERO setting (Standardization)
button
(4) START/OFF button
(2) Sample Stage
●Main unit ………………………………………………………………………………………1
●006P Alkaline Battery ………………………………………………………………………1
●Standard
liquid
……………………………………………………………………………1
●Instruction Manual ……………………………………………………………………………1
Measurement values, temperature, and
remaining battery charge are displayed.
The prism on which sample is dripped is existing
at the center of the Sample Stage.
Press the ZERO setting (Standardization)
button at Standardization (zero setting) of the
unit.
Press the START/OFF button to start
measurement. Note that the measurement value
goes off if this button is kept pressed for over 2
seconds.
(5) SCALE button
Press the SCALE button to select Butyro or
Refractive index.
(6) Battery Cover
Remove this cover to set or replace the
battery.
ATAGO's instruments are rigorously inspected to ensure each unit meets the highest
standards of quality assurance.
(1) Liquid Crystal
Display (LCD)
(2) Sample Stage
(6) Battery Cover
(4) START/OFF button
(3) ZERO Setting
（Standardization) button
(5) SCALE button
