Atag ZX4674M Instructions For Use Manual Download Page 46

Page: 46 / 48

EN 46

Clicking sounds can be heard when the oven is working,
particularly in the defrost setting.

• This is normal.

The circuit breaker switches off regularly.

• Consult a service technician.

The display gives an error code, ERROR XX ...

(XX indicates the number of the error).

• There is a fault in the electronic module. Disconnect the appliance

from the power supply for a few minutes. Then reconnect it and set
the current time.

• Consult a service technician if the error persists.

Storing and repairing the oven

Repairs should only be performed by a qualified service technician.
If maintenance is required, take the plug from the socket and contact
the ATAG customer service.

Have the following information to hand when you call:

• The model number and serial number (stated on the inside of the

oven door)

• Warranty details
• A clear description of the problem

Choose a clean, dry place if you have to store the oven temporarily,
as dust and moisture can damage the appliance.

SOLVING PROBLEMS

Summary of Contents for ZX4674M

















































Search results

Summary of Contents for ZX4674M

Reviews:

Related manuals for ZX4674M

Brands by name

Popular brands

Atag ZX4674M, Instructions For Use Manual

Search results

Summary of Contents for ZX4674M

Reviews:

Related manuals for ZX4674M

Brands by name

Popular brands