Atag ZX4674M Instructions For Use Manual Download Page 45

Page: 45 / 48

EN 45

SOLVING PROBLEMS

General

If you have problems with your oven, then consult the error overview
below. Should the problems persist, then please contact the Customer
Services Department.

The food stays raw

• Check whether the timer has been set and you have pressed the

confirm key.

• Is the door closed properly?
• Check whether a fuse has blown and whether a circuit breaker has

been activated.

The food is overcooked or undercooked

• Check whether the correct cooking time has been set.

The sensors don’t respond; the display is locked.

• Disconnect the appliance from the power supply for a few minutes

(unscrew the fuse or switch off the mains); then reconnect the
appliance and switch it on.

Power failure can cause the display to reset.

• Disconnect the appliance from the power supply for a few minutes

(remove the mains plug from the socket or switch the circuit
breaker to off); then reconnect the appliance and switch it on.

• Set the time again.

There is condensation in the oven.

• This is normal. Wipe the oven clean after use.

The fan keeps working after the oven is switched off.

• This is normal. The fan will keep working for a while after the oven

is switched off.

Air flow can be felt at the door and the exterior of the appliance.

• This is normal.

Steam escapes via the door or the vents.

• This is normal.

Summary of Contents for ZX4674M

















































Search results

Summary of Contents for ZX4674M

Reviews:

Related manuals for ZX4674M

Brands by name

Popular brands

Atag ZX4674M, Instructions For Use Manual

Search results

Summary of Contents for ZX4674M

Reviews:

Related manuals for ZX4674M

Brands by name

Popular brands