Atag WS6011MR, Instructions For Use Manual

Page: 75 / 90

GB 9
Switching on/off
Make sure the CMV system in your home is switched to the highest
setting.
• Press the On button.
The electric flap is opened; the hood switches on in the first setting.
The green LEDs in the display indicate the programmed setting.
• To switch off the hood directly, press the Off button for at least
two seconds.
The electric flap is closed; the hood switches off. The green LEDs in
the display will disappear.
▷
You can also repeatedly press the Off button until the green
LED’s in the display have disappeared.
▷
After switching on, wait at least 20 seconds before switching the
hood back off. The electric flap needs this time to open/close.
Adjusting the speed
The fan has four settings.
• Press the On button to go directly to the first setting.
The electric flap is opened; the hood switches on in the first setting.
The display shows the first green LED.
▷
If the hood is already running in the first setting (switched on with
the On button), the hood switches directly to the second setting.
• By pressing the On button (several times), the hood switches from
the first setting to a higher setting. Setting 4 is the intensive setting;
the fourth LED will blink in the display.
• If you choose setting 4, the hood switches automatically to setting 3
after 10 minutes. You can change the setting within these 10 minutes
by pressing the On or Off button (several times). The electric flap
stays open. To switch off the hood completely, press the Off button
for at least two seconds (the electric flap closes).
The intensive setting
• Press the On button for at least two seconds.
The hood switches to the intensive setting for 10 minutes. The
fourth green LED blinks in the display. After 10 minutes the hood
switches back to the original setting.
ON
ON
ON
OPERATION